English 
Antminer L3+
DCE
Model Antminer L3+ (504Mh) from Bitmain mining Scrypt algorithm with a maximum hashrate of 504Mh/s for a power consumption of 800W.
Specifications
Manufacturer | Bitmain |
Model | Antminer L3+ (504Mh) |
Release | June 2017 |
Size | 188 x 130 x 352mm |
Weight | 4400g |
Chip boards | 4 |
Chip name | BM1485 |
Chip count | 288 |
Noise level | 70db |
Fan(s) | 2 |
Power | 800W |
Wires | 9 * 6pins |
Voltage | 11.6 ~ 13.0V |
Interface | Ethernet |
Temperature | 0 - 40 °C |
Humidity | 5 - 95 % |
Notes:
1. Each Antminer L3+ needs 9 6-pin PCI-e ports for 12V DC input (must be very stable power supply) There are 4 hash boards, each requires 2 6-pin PCI-e ports, and an additional 1 connector on a 6-pin PCI-e controller. All nine 6-pin PCI-e connectors are required. Do not connect multiple PSUs to the same hash board to prevent possible damage and instability.
2. Power consumption data will vary based on your PSU efficiency, operating ambient temperature and power meter accuracy.
3. Does not include power supply unit. Bitmain recommends APW3++ power supply for Antminer L3+.
4. AntMiners are noisy. The L3+ sounds like a vacuum cleaner and is not recommended for use at home. Many use basements or sheds, but returns due to noise will incur a full restocking fee.
Compatible Coins: Any coin based on the Scrypt algorithm.
Model Antminer L3+ (504Mh) from Bitmain mining Scrypt algorithm with a maximum hashrate of 504Mh/s for a power consumption of 800W.
Specifications
Manufacturer | Bitmain |
Model | Antminer L3+ (504Mh) |
Release | June 2017 |
Size | 188 x 130 x 352mm |
Weight | 4400g |
Chip boards | 4 |
Chip name | BM1485 |
Chip count | 288 |
Noise level | 70db |
Fan(s) | 2 |
Power | 800W |
Wires | 9 * 6pins |
Voltage | 11.6 ~ 13.0V |
Interface | Ethernet |
Temperature | 0 - 40 °C |
Humidity | 5 - 95 % |
Notes:
1. Each Antminer L3+ needs 9 6-pin PCI-e ports for 12V DC input (must be very stable power supply) There are 4 hash boards, each requires 2 6-pin PCI-e ports, and an additional 1 connector on a 6-pin PCI-e controller. All nine 6-pin PCI-e connectors are required. Do not connect multiple PSUs to the same hash board to prevent possible damage and instability.
2. Power consumption data will vary based on your PSU efficiency, operating ambient temperature and power meter accuracy.
3. Does not include power supply unit. Bitmain recommends APW3++ power supply for Antminer L3+.
4. AntMiners are noisy. The L3+ sounds like a vacuum cleaner and is not recommended for use at home. Many use basements or sheds, but returns due to noise will incur a full restocking fee.
Compatible Coins: Any coin based on the Scrypt algorithm.
